ManufacturerAirsoftPro
Product codeASP-9007
Categories Airsoft Hop-Up chamber
Availability in stock
Expedition 24 - 48 hours
The third generation Hop-Up chamber for the Snow Wolf and Cyma M24 manual sniper rifle. It is made entirely from one piece of 6061-T6 aluminum alloy with a red anodized finish. This is a high strength, light weight material. The weight of the whole chamber is only 29 g.
Compared to the basic cast chamber, the AirsoftPro chamber brings a number of advantages. First of all, it is very good sealing and workmanship, i.e. high potential for increased performance. Another big advantage is the possibility of using the chamber for both original SW/Cyma barrels and rubber bands, as well as for AEG barrels and rubber bands primarily designed for electric guns.
The AEG adapter, which allows the use of AEG barrels, replaces the o-ring from previous generations of chambers. It is specially shaped to minimize air loss and for the best possible seal.
Quality:
- The chamber is CNC machined from highly durable 6061-T6 aircraft aluminum (Dural) with a red anodized finish.
- The pressure arm is also manufactured on CNC machines and is equipped with a return spring for more reliable functions.
- There are two rubber stops between the chamber and the cylinder head, which dampen shocks, reduce barrel vibrations and thus improve shooting accuracy.
- A centering ring is included for easy assembly/disassembly and good axial alignment of the rifled barrel.
Compatibility:
- The chamber is compatible with original Snow Wolf and Cyma barrels and rubber bands. Use does not require any modifications.
- With the included AEG Rubber Adapter, barrels with rubber from electric guns (AEG) can also be used with better sealing results than the o-ring provided.
- The chamber is compatible with original Snow Wolf and Cyma plastic Hop-Up regulation pulls. No modifications are required for use.
- There is a thread in the top of the chamber for possible bolting of TDC devices.
- The chamber is compatible with the following models: Snow Wolf M24 (SW-04) and Cyma M24 (CM.702)
Installation:
- Installation is very easy, manageable within 10 minutes.
- The suitable length of the AEG barrel for the above models is approx. 487mm.
- Due to the greater power of sniper rifles, choose the harder Hop-Up rubber bands (silicone bands are not suitable). The Guarder rubber band - black - is a proven choice.
Package contents:
- CNC Hop-Up chamber for M24, Gen.3
- Rubber AEG Adapter
- Centering ring
- Pressure spring return
- Screw with o-ring (can be exchanged for a worm to hold the hop-up rod more firmly)
- Two 3mm diameter rubber pressure rollers for the original rubber band and 3.5mm for the AEG rubber band under the arm (user can shorten them according to their needs)
Weight: 50g
Colour: Red
The third generation Hop-Up chamber for the Snow Wolf and Cyma M24 manual sniper rifle. It is made entirely from one piece of 6061-T6 aluminum alloy with a red anodized finish. This is a high strength, light weight material. The weight of the whole chamber is only 29 g.
Compared to the basic cast chamber, the AirsoftPro chamber brings a number of advantages. First of all, it is very good sealing and workmanship, i.e. high potential for increased performance. Another big advantage is the possibility of using the chamber for both original SW/Cyma barrels and rubber bands, as well as for AEG barrels and rubber bands primarily designed for electric guns.
The AEG adapter, which allows the use of AEG barrels, replaces the o-ring from previous generations of chambers. It is specially shaped to minimize air loss and for the best possible seal.
Quality:
- The chamber is CNC machined from highly durable 6061-T6 aircraft aluminum (Dural) with a red anodized finish.
- The pressure arm is also manufactured on CNC machines and is equipped with a return spring for more reliable functions.
- There are two rubber stops between the chamber and the cylinder head, which dampen shocks, reduce barrel vibrations and thus improve shooting accuracy.
- A centering ring is included for easy assembly/disassembly and good axial alignment of the rifled barrel.
Compatibility:
- The chamber is compatible with original Snow Wolf and Cyma barrels and rubber bands. Use does not require any modifications.
- With the included AEG Rubber Adapter, barrels with rubber from electric guns (AEG) can also be used with better sealing results than the o-ring provided.
- The chamber is compatible with original Snow Wolf and Cyma plastic Hop-Up regulation pulls. No modifications are required for use.
- There is a thread in the top of the chamber for possible bolting of TDC devices.
- The chamber is compatible with the following models: Snow Wolf M24 (SW-04) and Cyma M24 (CM.702)
Installation:
- Installation is very easy, manageable within 10 minutes.
- The suitable length of the AEG barrel for the above models is approx. 487mm.
- Due to the greater power of sniper rifles, choose the harder Hop-Up rubber bands (silicone bands are not suitable). The Guarder rubber band - black - is a proven choice.
Package contents:
- CNC Hop-Up chamber for M24, Gen.3
- Rubber AEG Adapter
- Centering ring
- Pressure spring return
- Screw with o-ring (can be exchanged for a worm to hold the hop-up rod more firmly)
- Two 3mm diameter rubber pressure rollers for the original rubber band and 3.5mm for the AEG rubber band under the arm (user can shorten them according to their needs)
Colour: Red
product_not_enough