ManufacturerAirsoftPro
Product codeASP-7430
Categories Silencer adapters and inserts
Availability in stock
Expedition 24 - 48 hours
Silencer adapter for airsoft guns. It simply screws onto the end of the rifle barrel, in place of the cap. You can screw on smaller threads to any suppressors or compensators with a standard 14mm left-hand thread. There is a rubber ring inserted inside the adapter to improve the guidance of the long barrel. This fixes exactly in the centre of the adapter and dampens vibration. The adapter is also equipped with a thread protector that prevents damage to, or fouling of, the thread.
Characteristics:
- 6061 T6 aluminum alloy
- Chemically blackened
- Beveled inner edge for better barrel guidance into the adapter
- Inner barrel passes through centering rubber ring
- Diamond knurling around the perimeter of both the adapter and thread cap
- Gun thread: M16x1 right-handed
- External thread for silencer: M14x1 left-handed
- Cross holes in both threads are for possible better tightening or loosening
Use: Tokyo Marui VSR-10 G-Spec, Tokyo Marui L96 AWS, JG BAR-10 G-Spec, CYMA CM.703
Use on Well MB02 and MB4401 (Only models from approx 2017 onwards. Please measure the internal diameter of the thread in the barrel cap before purchase. As long as it is approx 16mm, this adapter is suitable. If it is approx. 18mm, then it is advisable to choose the adapter from AirsoftPro with the number 7432)
Weight: 15g
Silencer adapter for airsoft guns. It simply screws onto the end of the rifle barrel, in place of the cap. You can screw on smaller threads to any suppressors or compensators with a standard 14mm left-hand thread. There is a rubber ring inserted inside the adapter to improve the guidance of the long barrel. This fixes exactly in the centre of the adapter and dampens vibration. The adapter is also equipped with a thread protector that prevents damage to, or fouling of, the thread.
Characteristics:
- 6061 T6 aluminum alloy
- Chemically blackened
- Beveled inner edge for better barrel guidance into the adapter
- Inner barrel passes through centering rubber ring
- Diamond knurling around the perimeter of both the adapter and thread cap
- Gun thread: M16x1 right-handed
- External thread for silencer: M14x1 left-handed
- Cross holes in both threads are for possible better tightening or loosening
Use: Tokyo Marui VSR-10 G-Spec, Tokyo Marui L96 AWS, JG BAR-10 G-Spec, CYMA CM.703
Use on Well MB02 and MB4401 (Only models from approx 2017 onwards. Please measure the internal diameter of the thread in the barrel cap before purchase. As long as it is approx 16mm, this adapter is suitable. If it is approx. 18mm, then it is advisable to choose the adapter from AirsoftPro with the number 7432)
product_not_enough