ManufacturerDelta Armory
Product codeDA-PAR-16
Categories M4/M16/HK416/AR15/SR-25 Czechoslovakia airsoft guns
Availability in stock
Expedition 24 - 48 hours
Airsoft PROARMS PAR MK3 is back, as ICS lost its license a few years ago, this model became unhackable.
Delta Armory has acquired the license to produce the Proarms PAR MK3 and brings this model as their highest quality product to date.
The external metal parts (body and forearm) are not made of zinc castings as we know 99% of ,,Full metal,, airsoft guns but in a way very similar to how edged weapons are made - on CNC machines, specifically blocks of 6063 aluminium.
The PARka has a QRS quick change spring system - where you just take off the stock and tube and you can change the spring
The hop-up chamber as with the other guns is a Rotary type.
Internal parts in PAR MK3:
Stainless steel CNC steel cylinder
Stainless steel CNC steel spring mandrel QD
Stainless steel Steel precision barrel 6,03mm
CNC Piston Head
CNC Cylinder head with double seal
CNC Nozzle with double seal
ETU processor has the features:
Pre-cocking - spring preload - faster trigger pull response
Binary trigger - double shot - when the trigger is squeezed the gun fires once and when the trigger is released it fires a second time
Burst mode - possibility to set triple burst firing
And of course, thanks to the ETU processor, the gun has a fast cadence and the trigger response is much better than with classic mechanical trigger contacts.
At the same time, the ETU series is equipped with a Deans T connector, which replaced the small tamiya.
Due to the high quality internal parts, we recommend using 11.1V LiPo batteries. For example, an 11.1V LiPo 1100mAh battery or another battery with approximate dimensions: 1.4 x 1.9 x 10 cm.
Weight: 2900g
Blow Back: Not
Colour: Black
Hop-Up: Yes, adjustable
Piston: SHS reinforced with 14 metal teeth
Firing mode: Semi a Full-auto
Muzzle Velocity [FPS]: ~400FPS
Lenght of inner barrel [mm]: 400
Length [mm]: 840 - 920
Type of magazine: Mid-Cap
Airsoft PROARMS PAR MK3 is back, as ICS lost its license a few years ago, this model became unhackable.
Delta Armory has acquired the license to produce the Proarms PAR MK3 and brings this model as their highest quality product to date.
The external metal parts (body and forearm) are not made of zinc castings as we know 99% of ,,Full metal,, airsoft guns but in a way very similar to how edged weapons are made - on CNC machines, specifically blocks of 6063 aluminium.
The PARka has a QRS quick change spring system - where you just take off the stock and tube and you can change the spring
The hop-up chamber as with the other guns is a Rotary type.
Internal parts in PAR MK3:
Stainless steel CNC steel cylinder
Stainless steel CNC steel spring mandrel QD
Stainless steel Steel precision barrel 6,03mm
CNC Piston Head
CNC Cylinder head with double seal
CNC Nozzle with double seal
ETU processor has the features:
Pre-cocking - spring preload - faster trigger pull response
Binary trigger - double shot - when the trigger is squeezed the gun fires once and when the trigger is released it fires a second time
Burst mode - possibility to set triple burst firing
And of course, thanks to the ETU processor, the gun has a fast cadence and the trigger response is much better than with classic mechanical trigger contacts.
At the same time, the ETU series is equipped with a Deans T connector, which replaced the small tamiya.
Due to the high quality internal parts, we recommend using 11.1V LiPo batteries. For example, an 11.1V LiPo 1100mAh battery or another battery with approximate dimensions: 1.4 x 1.9 x 10 cm.
Blow Back: Not
Colour: Black
Hop-Up: Yes, adjustable
Piston: SHS reinforced with 14 metal teeth
Firing mode: Semi a Full-auto
Muzzle Velocity [FPS]: ~400FPS
Lenght of inner barrel [mm]: 400
Length [mm]: 840 - 920
Type of magazine: Mid-Cap
product_not_enough